Steam & Water Line

WATER FLOW METER

Water Flow Meter

Impeller Water Flow Indicator

Flap Water Flow Indicator

Floating Ball Water Flow Indicator

Magnetic-inductive sensor for a wide range of applications

Our magnetic-inductive sensors (MID) are precision measurement devices and suitable for linear flow measurement of almost all electrically conductive liquids, as well as slurries, pulps and pastes. Thanks to the magnetic field’s properties, these devices can be used for flow speeds up to 10 m/s (32.8 ft/s) and for a minimum conductivity of 20 / 3 µS/cm.

The flow meter consists of a sensor and a corresponding measuring transducer. They are available both in separate and in compact designs.

water flow meter

Macon Water Flow Meter

 Area of application:

The key applications for the mag-flux A magnetic-inductive sensor (MID) are in flow measurement of electrically conductive liquids such as e.g. water, pulps, pastes, slurries, acids, solvents, lyes, emulsions, or slurries, sand or water mixes, including liquids with a minimum conductivity of 20 / 3 µS/cm.

Special features of the flow meter:

  • For nominal sizes from DN 15 (1/2″) to DN 1000 (40″), on request up to DN 2000 (80″)
  • Fully welded steel fitting (robust and interference-free)
  • Signal amplifier in sensor
  • Measuring tube internal diameter from 15 mm (0.591″)
  • Pressure stages to 250 bar

Steam Safety Valve

steam-safety-valve

Steam Safety Valve

Features:

  • Size  :   DN 25 – DN 200 | 1″ – 8″
    Rating  :   CL150  –  CL2500
    Pressure   :   0.12 bar – 413.7 bar | 2 psig – 6,000 psig
    Actual orifice diameter d0   :   14  –  161,5 mm
    Actual orifice area A0   :   154  –  20485 mm²
    Material    :   1.0619, 1.4408, 1.7357 | SA 216 WCB, SA 351 CF8M, SA 217 WC6, SA 352 LCB, SA 351 CF3M, SA 995 Gr 4A CD3MN (Duplex), SA 494 M35-1 (Monel)
    Temperature   :   -268 °C bis 538 °C | -450 °F bis 1,000 °F
    End  :   Flange in accordance with ASME B 16.5 or DIN EN 1092
    Load Type  :   Spring-loaded

    Feature and Benefit:

    » High blow-off capacity in comparison to valve size
    » Outstanding value for the price
    » Simple and robust construction
    » Single trim (identical internal parts for steam/gas/liquid) allows economical maintenance
    » Large selection of options for different operating conditions
    » Proven thousands of times

» Chemical
» Oil & Gas
» Petrochemical
» Technical Gases» General Industries

 Area of application:

The key applications for the mag-flux A magnetic-inductive sensor (MID) are in flow measurement of electrically conductive liquids such as e.g. water, pulps, pastes, slurries, acids, solvents, lyes, emulsions, or slurries, sand or water mixes, including liquids with a minimum conductivity of 20 / 3 µS/cm.

Special features of the flow meter:

  • For nominal sizes from DN 15 (1/2″) to DN 1000 (40″), on request up to DN 2000 (80″)
  • Fully welded steel fitting (robust and interference-free)
  • Signal amplifier in sensor
  • Measuring tube internal diameter from 15 mm (0.591″)
  • Pressure stages to 250 bar
Start typing to see products you are looking for.